• 網站標志
    導航菜單
    全站搜索
    廣告位
    Ball screw and linear motor performance comparison
    Time:2018-06-07 17:01:53    Page view (1878)
    Tabloid:In 1845 the British had invented the linear motor, the linear motor gap but it was too large inefficient, it can not be applied...

    In 1845 the British had invented the linear motor, the linear motor gap but it was too large inefficient, it can not be applied. 1870s Kollmorgen also launched, high efficiency and low cost but limits its development. Until after the 1970s, and gradually developed linear motor used in some specific areas, the 1990s began the linear motor used in machinery manufacturing, and now some of the world technologically advanced machining center manufacturers began to use in its high-speed machine tools, foreign well-known enterprises such as DMG, Ex-cell-O, Ingersoll, CINCI ATI, GROB, MATEC, MAZAK, FANUC, SODICK have launched the use of high-speed linear motor finishing center.

    With the development of direct drive technology, linear motor contrast with the traditional "rotary servo motor and ball screw" driving method of causing the industry's attention.

    HIWIN linear as the world leader in products, after the success in terms of ball screw and linear slide, in recent years, its own research and development and production of the linear motor, and achieved good results in the field of high speed and high precision.

    Below the main reference HIWIN company's advanced high-speed mute screw SUPER S series (DN value of 220,000) and HIWIN linear motor made on several key characteristics of some of the more relevant industry to provide a reference.

    Speed Comparison:

    Speed linear motor has a considerable advantage, the linear motor speed 300m / min, acceleration of 10g; Ball screw speed was 120m / min, acceleration of 1.5g. From the comparison of the speed and acceleration, the linear motor has a considerable advantage, and will further improve the speed of the linear motor in the successful resolution of the heating problem, and "rotary servo motor and ball screw," the speed is limited by difficult further increase more.

    From the dynamic response because the movement gap and institutional inertia and the complexity of issues such as the linear motor also has an absolute advantage.

    Linear motor speed control because of its quick response and a wider speed range, can start instantly reach maximum speed, and can quickly stop running at high speed. Speed range up to 1: 10000.

    Accuracy Comparison:

    Precision linear motor actuator due to simple interpolation to reduce lag issues, positioning accuracy, reproducibility accuracy, absolute accuracy by the position detection feedback control will be more "rotary servo motor and ball screw" high, and easy to implement.

    Linear motor positioning accuracy up to 0.1μm. "Rotary servo motor and ball screw" up to 2 ~ 5μm, and requires CNC- servo motors - seamless coupling - thrust bearings - Cooling system - precision rolling guide - Nut seat - bench the entire closed-loop system of transmission in part to reduce the weight, higher precision grating.

    To achieve a higher stability, "rotary servo motor and ball screw" to take the biaxial drive linear motor is a high-heat-generating components, you need to take strong measures to cool, to achieve the same purpose, the linear motor will have to pay a higher price .

    price comparison: 

    Price price much higher linear motor, which is the reason for limiting the linear motor is more widely used.

    Comparison of energy consumption:

    In the linear motor energy to provide the same torque is "rotary servo motor and ball screw" more than doubled "rotary servo motor and ball screw" are energy-saving, energizing shaped actuator, linear motor control system reliability by stability, a great impact on the surrounding magnetic isolation and must take effective protective measures to cut off the strong magnetic field on rolling guide and the adsorption of magnetic iron dust.

    The following examples make it easier for everyone to understand linear motors and "rotary servo motor and ball screw," some of the features:

    Japanese company super high-speed gantry machining center. X, Y-axis linear motor drive V = 120m / min. Why the company does not use "rotation servo motor + ball screw (HIWIN SUPER S series)"? Because SUPER S Although DN value has gone from the traditional screw 70000-150000 then 220,000 speed the process, but because of the soft underbelly of a purely mechanical transmission, the line speed, acceleration, increased range of travel is always limited. If the selection of Φ40 × 20mm product, then vmax = 110m / min, due to the high nmax = 5500r / min speed travel range is limited by the critical speed Nc constraints obviously not too long. If using a large lead Φ40 × 40mm product, Vmax = 220m / min, which obviously can not meet the high precision positioning applications. DN value of 220,000 to reach a reflection of the HIWIN design and manufacturing standards. If we choose Φ40 × 20 (double head) mm products, n≈4000 ~ 5000r / min, V = at 80 ~ 100m / min using a state, its security, reliability, service life can be higher than expected. In fact so far, at high speed and high precision CNC metal cutting machine tools (CNC shaping machine except) speed V≥120m / min still use the successful example SUPER S-Series drive is not seen. "Rotary servo motor and ball screw," the best applications is actually: Requires V = 40 ~ 100m / min, acceleration of 0.8 ~ 1.5 (2.0) g, precision P3 level and above mid-range high-speed CNC equipment and some high-end CNC equipment .


    自定內容


    Contact us

    Contact us


    Tianning industrial zone of Lishui city Liandu District 6 Building


    0578-2131555

    Fax:0578-2118884


          



    自定內容

    Copyright © 2016  Lishui City Sanding Bearing Manufacturing Co., Ltd.  ALL RIGHTS RESERVED SERVICE PROVIDER@Zhejiang 7-mi


    在線
    客服

    在線客服服務時間:9:00-24:00

    選擇下列客服馬上在線溝通:

    客服
    熱線

    020-22043297
    7*24小時客服服務熱線

    關注
    三鼎

    關注三鼎微信
  • 亚洲高清中文字幕 久久久久亚洲Aⅴ无码性色| 久久久久免费视频| 亚洲综合色一区二区三区软件| 无码人妻精一区二区三区| 秋霞韩国| 国产区综合另类亚洲欧美| 国产精品自在线拍国产| 国产精品久久久久久夜夜夜夜| 国产亚洲精A在线看| 亚洲Av樱花无码久久噜| 欧美成人一区二区三区在线电影| 亚洲另类无码专区偷拍| 视色视频| 亚洲一区二区久久精品| 国产高清福利| 久久久7777888精品| 久久精品国产一区二区三区香蕉| 亚洲精品国产第一区二区尤物| 欧洲女人a片中文字幕一区二区三区| 欧美一级特黄aaaaaa在线看片| 亚洲精品无码久久久久Av麻豆| 无码国模在线观看AⅤ| 亚洲国产日韩欧美| 久久婷婷五月综合色欧美蜜芽| 麻豆传煤网站网址入口在线下载| 久久天天躁狠狠躁夜夜aⅴ| 三级特60分钟在线播2| 久久国产精品77777| 久久久久免费看少妇高潮A片| 无码人妻在线视频导航| 一本久道AV无码专区加勒比| 一区二区国产精品| 日本精品videosse×少妇| 精品国产亚洲| 国产精品自在线拍国产| 国产免费片在线观看| 国产在线播放kkk| 99精品视频在线观看免费播放| 人人爱人人爽| 国产成人午夜精品5599| 亚洲高清在线| http://www.agjoxva.cn http://www.konsi.cn http://www.tlhuazhong.com.cn